Hi-temp 1800 Mold Release And Lubricant
Home > Chemicals > Delphi Creativity (Hi-temp 1800 Mold Release And Lubricant)
|
|
|
 |
Applying release to stainless steel molds has never been easier. Slide and 39;s Hi-Temp 1800 Boron Nitrate Spray is an aerosol mold release primer for slumping and fusing molds. Sold in 10 oz canisters, Hi-Temp 1800 is great for metal molds because there and 39;s no need to pre-heat the mold before applying. Hi-Temp 1800 dries instantly and is good for multiple firings below 1350 Fahrenheit. Easy to Use Hi-Temp 1800 is easy to apply to any metal mold. Just spray on 2 thin coats. The mold surface will be visible through the spray. If you cannot see the mold surface you have applied too much. For firings above 1350 degrees Fahrenheit, you will have to re-coat your mold after each firing. Also Great for Ceramic Molds For best results on ceramic slumping molds, apply 4 thorough coats. Glass releases easily, and the uniform coating provides a flawlessly smooth back on your project. For firings up to 1300 degrees Fahrenheit. Holds up well for multiple firings. 10 oz.
Only $19.95 - Click here to buy now! |